Netgear GS418TPP User Manual - Page 298

ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 5. Select Security > Management Security > SCC Control. 6. Select the one of the following SCC Admin Mode radio buttons: • Enable. SCC can discover the switch and perform actions on the switch. This is the default setting. • Disable. SCC can discover the switch but cannot perform any actions on the switch. Note: Because the switch administrator password is contained in each NETGEAR Switch Discovery Protocol (NSDP) packet, disabling SCC increases the switch security. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure Management Access You can configure HTTP and secure HTTP access to the switch management interface. You can also configure access control profiles and access rules. Configure HTTP Settings You can configure the HTTP settings on the switch.  To configure the HTTP server settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. Manage Device Security 298