Netgear GS418TPP User Manual - Page 206
Con a Static MAC Address, Address Aging Timeout seconds, Apply, Password
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 6. In the Address Aging Timeout (seconds) field, specify the time-out period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds. The value can be any number between 10 and 1000000 seconds. The default is 300. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Configure a Static MAC Address To configure a static MAC address: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching > Address Table > Advanced > Static MAC Address. Configure Switching 206