Netgear GS418TPP User Manual - Page 329
Con a Private VLAN Promiscuous Interface
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 5. Select Security > Traffic Control > Private VLAN > Private VLAN Host Interface Configuration. 6. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. 7. In the Host Primary VLAN field, enter the primary VLAN ID for the host association mode. The range of the VLAN ID is 2-4093. 8. In the Host Secondary VLAN field, enter the secondary VLAN ID for host association mode. The range of the VLAN ID is 2-4093. 9. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The Operational VLAN(s) field displays the operational VLANs. Configure a Private VLAN Promiscuous Interface To configure a private VLAN promiscuous interface: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. Manage Device Security 329