Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 101

pem thermal-sensor Enter the keyword pem to view only information on power entry modules. Enter the keyword thermal-sensor to view only information on the thermal sensors. Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.6.1.0 Introduced on the S55. The output of the show environment fan command for S-Series is changed to display fan speeds instead of just showing the fan status as up or down. Introduced for S-Series. S-Series options and output differ from the C-Series/E-Series version. Example Figure 4-16. Command Example: show environment on the S55 Force10#show environment -- Fan Status -- Status Temp Fan1 Fan2 Fan3 Serial Num Version up 32C 6000 RPM 6000 RPM 7500 RPM FX000040889 3.2 -- Power Supplies -Bay Status 0 absent 1 up 2 up 3 up -- Line Card Environment Status -- Slot Status Temp Voltage 0 not present 1 online 66C ok 2 not present 3 online 59C ok 4 online 64C ok 5 not present 6 online 59C ok -- RPM Environment Status -- Slot Status Temp Voltage 0 active 36C ok 1 not present -- SFM Environment Status -Force10# Example Figure 4-17. Command Example: show environment fan Force10#show environment fan -- Fan Status -- Status Temp Fan1 Fan2 Fan3 Serial Num Version up 32C 6000 RPM 6000 RPM 6000 RPM FX000040889 3.2 Control and Monitoring | 101