Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 675

Example 2 Figure 23-6. show spanning-tree msti with EDS and LBK Force10#show spanning-tree msti 0 brief MSTI 0 VLANs mapped 1-4094 Executing IEEE compatible Spanning Tree Protocol Root ID Priority 32768, Address 0001.e801.6aa8 Root Bridge hello time 2, max age 20, forward delay 15, max hops 20 Bridge ID Priority 32768, Address 0001.e801.6aa8 We are the root of MSTI 0 (CIST) Configured hello time 2, max age 20, forward delay 15, max hops 20 CIST regional root ID Priority 32768, Address 0001.e801.6aa8 CIST external path cost 0 Interface Designated Name PortID Prio Cost Sts Cost Bridge ID PortID Gi 0/0 128.257 128 20000 EDS 0 32768 0001.e801.6aa8 128.257 Interface Name Role PortID Prio Cost Sts Cost Link-type Edge Boundary Gi 0/0 ErrDis 128.257 128 20000 EDS 0 P2P No No Force10#show spanning-tree msti 0 MSTI 0 VLANs mapped 1-4094 Root Identifier has priority 32768, Address 0001.e801.6aa8 Root Bridge hello time 2, max age 20, forward delay 15, max hops 20 Bridge Identifier has priority 32768, Address 0001.e801.6aa8 Configured hello time 2, max age 20, forward delay 15, max hops 20 We are the root of MSTI 0 (CIST) Current root has priority 32768, Address 0001.e801.6aa8 CIST regional root ID Priority 32768, Address 0001.e801.6aa8 CIST external path cost 0 Number of topology changes 1, last change occured 00:00:15 ago on Gi 0/0 Port 257 (GigabitEthernet 0/0) is LBK_INC Discarding Loopback BPDU Port path cost 20000, Port priority 128, Port Identifier 128.257Inconsistency Designated root has priority 32768, address 0001.e801.6aa8 Designated bridge has priority 32768, address 0001.e801.6aa8 (LBK_INC) Designated port id is 128.257, designated path cost 0 Number of transitions to forwarding state 1 BPDU (MRecords): sent 21, received 9 The port is not in the Edge port mode Usage You must enable Multiple Spanning Tree Protocol prior to using this command. Information spanning-tree c e s Enable Multiple Spanning Tree Protocol on the interface. Syntax spanning-tree To disable the Multiple Spanning Tree Protocol on the interface, use no spanning-tree Parameters spanning-tree Enter the keyword spanning-tree to enable the MSTP on the interface. Default: Enable Defaults Enable Command Modes INTERFACE Multiple Spanning Tree Protocol (MSTP) | 675