Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 725

Parameters number Specify the number of paths. Range: 1 to 16. Default: 4 paths. Defaults 4 Command Modes ROUTER OSPF Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S55 Introduced support for Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series mib-binding c e s Enable this OSPF process ID to manage the SNMP traps and process SNMP queries. Syntax mib-binding To mib-binding on this OSPF process, enter no mib-binding. Defaults None. Command Modes ROUTER OSPF Command History Version 8.3.5.0 Version 7.8.1.0 Introduced on S55 Introduced to all platforms. Usage This command is either enabled or disabled. If no OSPF process is identified as the MIB manager, the Information first OSPF process will be used. If an OSPF process has been selected, it must be disabled prior to assigning new process ID the MIB responsibility. network area c e s Define which interfaces run OSPF and the OSPF area for those interfaces. Syntax network ip-address mask area area-id To disable an OSPF area, use the no network ip-address mask area area-id command. Parameters ip-address Specify a primary or secondary address in dotted decimal format. The primary address is required before adding the secondary address. Open Shortest Path First (OSPFv2 and OSPFv3) | 725