Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 251

set level c e s Configure a filter to specify the IS-IS level or OSPF area to which matched routes are redistributed. Syntax set level {backbone | level-1 | level-1-2 | level-2 | stub-area} To remove a set level condition, use the no set level {backbone | level-1 | level-1-2 | level-2 | stub-area} command. Parameters backbone level-1 level-1-2 level-2 stub-area Enter the keyword backbone to redistribute matched routes to the OSPF backbone area (area 0.0.0.0). Enter the keyword level-1 to redistribute matched routes to IS-IS Level 1. Enter the keyword level-1-2 to redistribute matched routes to IS-IS Level 1 and Level 2. Enter the keyword level-2 to redistribute matched routes to IS-IS Level 2. Enter the keyword stub to redistributed matched routes to OSPF stub areas. Defaults Not configured. Command Modes ROUTE-MAP Command History Version 8.3.5.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the S55. Introduced on E-Series ExaScale Support added for S-Series Support added for C-Series Introduced for E-Series Related Commands set automatic-tag set metric set metric-type set tag Compute the tag value of the route. Specify the metric value assigned to redistributed routes. Specify the metric type assigned to redistributed routes. Specify the tag assigned to redistributed routes. set local-preference c e s Configure a filter to set the BGP LOCAL_PREF attribute for routers within the local autonomous system. Syntax set local-preference value To delete a BGP LOCAL_PREF attribute, enter no set local-preference. Parameters value Enter a number as the LOCAL_PREF attribute value. Range: 0 to 4294967295 Defaults Not configured Command Modes ROUTE-MAP Access Control Lists (ACL) | 251