Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 827

Command History Version 8.3.5.0 Version 8.2.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 pre-Version 6.1.1.1 Introduced on S55 Policy name character limit increased from 16 to 32. Introduced on S-Series Introduced on C-Series Expanded to add support for Layer 2 Introduced on E-Series Usage Information Input policy map is used to classify incoming traffic to different flows using class-map, QoS policy, or simply using incoming packets DSCP. This command enables policy-map-input configuration mode (conf-policy-map-in). Related Commands service-queue policy-aggregate service-policy input Assign a class map and QoS policy to different queues. Allow an aggregate method of configuring per-port QoS via policy maps. Apply an input policy map to the selected interface. policy-map-output c e s Create an output policy map. Syntax Parameters policy-map-output policy-map-name To remove a policy map, use the no policy-map-output policy-map-name command. policy-map-name Enter the name for the policy map in character format (16 characters maximum). Defaults Command Modes Command History No default behavior or values CONFIGURATION Version 8.3.5.0 Version 8.2.1.0 Version 7.6.1.0 pre-Version 6.1.1.1 Introduced on S55 Policy name character limit increased from 16 to 32. Introduced on C-Series and S-Series Introduced on E-Series Usage Information Related Commands Output policy map is used to assign traffic to different flows using QoS policy. This command enables the policy-map-output configuration mode (conf-policy-map-out). service-queue policy-aggregate service-policy output Assign a class map and QoS policy to different queues. Allow an aggregate method of configuring per-port QoS via policy maps. Apply an output policy map to the selected interface. Quality of Service (QoS) | 827