Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 1040

www.dell.com | support.dell.com calendar set c e s Set the time and date for the switch hardware clock. Syntax calendar set time month day year Parameters time month day year Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format, for example, 17:15:00 is 5:15 pm. Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. Enter the number of the day. Range: 1 to 31. You can enter the name of a month to change the order of the display to time day month year. Enter a four-digit number as the year. Range: 1993 to 2035. Command Modes EXEC Privilege Command History Version 8.3.5.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on S55 Support added for S-Series Support added for C-Series Introduced for E-Series Example Figure 43-1. calendar set Command Example Force10#calendar set 08:55:00 june 18 2006 Force10# Usage You can change the order of the month and day parameters to enter the time and date as time day Information month year. In the switch, the hardware clock is separate from the software and is called the calendar. This hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS automatically updates the software clock after system bootup.You cannot delete the hardware clock (calendar). To manually update the software with the hardware clock, use the command clock read-calendar. Related Commands clock read-calendar clock set clock update-calendar show clock Set the software clock based on the hardware clock. Set the software clock. Set the hardware clock based on the software clock. Display clock settings. 1040 | Time and Network Time Protocol (NTP)