Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 129

E-Series Example Figure 4-52. Command Example: show rpm on E-Series FTOS#show RPM 0 -- RPM card 0 -- Status : active Next Boot : online Card Type : RPM - Route Processor Module (LC-EH-RPM) Hardware Rev : 3.1 Num Ports : 1 Up Time : 18 hr, 48 min Last Restart : reset by user FTOS Version : 8-4-1-317 Jumbo Capable : yes CP Boot Flash : A: 2.5.1.0 [booted] B: 2.5.1.0 RP1 Boot Flash: A: 2.5.1.0 [booted] B: 2.5.1.0 RP2 Boot Flash: A: 2.5.1.0 [booted] B: 2.5.1.0 CP Mem Size : 1073741824 bytes RP1 Mem Size : 1073741824 bytes RP2 Mem Size : 1073741824 bytes MMC Mem Size : 3566329856 bytes External MMC : 128180224 bytes USB Mem Size : n/a Temperature : 36C Power Status : AC Voltage : ok Serial Number : FX000056234 Part Number : 7520043401 Rev 05 Vendor Id : 04 Date Code : 01072010 Country Code : 01 Piece Part ID : N/A PPID Revision : N/A Service Tag : N/A Expr Svc Code : N/A FTOS# Table 4-7 defines the fields displayed in Figure 4-52. Table 4-7. Descriptions of show rpm output Field Status Next Boot Card Type Hardware Rev Num Ports Up Time Last Restart FTOS Version Description Displays the RPM's status. Displays whether the RPM is to be brought online at the next system reload. Displays the RPM catalog number. Displays theE-Series chipset hardware revision level: 1.0 (non-Jumbo); 1.5 (Jumbo-enabled); 2.0 (or above is TeraScale). Displays the number of active ports. Displays the number of hours and minutes since the RPM's last reboot. States the reason for the last RPM reboot. C-Series possible values: • "normal power-cycle" (reset power-cycle command) • "reset by master" (peer RPM reset by master RPM) • "over temperature shutdown" • "power supply failed" E-Series possible values: • "normal power-cycle" (insufficient power, normal power cycle) • "reset by user" (automatic failover, software reload of both RPMs, or master RPM resetting peer) • "force-failover" (redundancy force-failover command) Displays the operating software version. Control and Monitoring | 129