Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 769

Example Figure 27-2. show ip pim bsr-router Command Example E600-7-rpm0#show ip pim bsr-router PIMv2 Bootstrap information This system is the Bootstrap Router (v2) BSR address: 7.7.7.7 (?) Uptime: 16:59:06, BSR Priority: 0, Hash mask length: 30 Next bootstrap message in 00:00:08 This system is a candidate BSR Candidate BSR address: 7.7.7.7, priority: 0, hash mask length: 30 show ip pim interface c e s View information on the interfaces with IP PIM enabled. Syntax show ip pim interface Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Version 8.1.1.0 Version 7.8.1.0 Introduced on S55 Introduced on E-Series ExaScale Introduced on S-Series Example Figure 27-3. show ip pim interface Command Example E600-7-RPM0#show ip pim interface Address Interface Ver/ Nbr Mode Count 172.21.200.254 Gi 7/9 v2/S 0 172.60.1.2 Gi 7/11 v2/S 0 192.3.1.1 Gi 7/16 v2/S 1 192.4.1.1 Gi 13/5 v2/S 0 172.21.110.1 Gi 13/6 v2/S 0 172.21.203.1 Gi 13/7 v2/S 0 Query Intvl 30 30 30 30 30 30 DR DR Prio 1 172.21.200.254 1 172.60.1.2 1 192.3.1.1 1 192.4.1.1 1 172.21.110.1 1 172.21.203.1 Table 27-1. show ip pim interface Command Example Fields Field Address Interface Ver/Mode Nbr Count Query Intvl Description Lists the IP addresses of the interfaces participating in PIM. List the interface type, with either slot/port information or ID (VLAN or Port Channel), of the interfaces participating in PIM. Displays the PIM version number and mode for each interface participating in PIM. • v2 = PIM version 2 • S = PIM Sparse mode Displays the number of PIM neighbors discovered over this interface. Displays the query interval for Router Query messages on that interface (configured with ip pim query-interval command). PIM-Sparse Mode (PIM-SM) | 769