Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 330

www.dell.com | support.dell.com received-routes [network [network-mask] denied-routes [network [network-mask] (OPTIONAL) Enter the keywords received-routes followed by either the network address (in dotted decimal format) or the network mask (in slash prefix format) to view all information received from neighbors. Note: neighbor soft-reconfiguration inbound must be configured prior to viewing all the information received from the neighbors. (OPTIONAL) Enter the keywords denied-routes followed by either the network address (in dotted decimal format) or the network mask (in slash prefix format) to view all information on routes denied via neighbor inbound filters. Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.7.1.0 Version 7.5.1.0 Version 7.2.1.0 Version 6.3.10 Introduced on the S55. Introduced support on S-Series Introduced support on C-Series Added detail option and output now displays default MED value Added received and denied route options The output is changed to display the total number of advertised prefixes Example 1 Figure 8-16. Command Example: show ip bgp neighbors (Partial) Force10#show ip bgp neighbors BGP neighbor is 100.10.10.2, remote AS 200, external link BGP version 4, remote router ID 192.168.2.101 BGP state ESTABLISHED, in this state for 00:16:12 Last read 00:00:12, last write 00:00:03 Hold time is 180, keepalive interval is 60 seconds Received 1404 messages, 0 in queue 3 opens, 1 notifications, 1394 updates 6 keepalives, 0 route refresh requests Sent 48 messages, 0 in queue 3 opens, 2 notifications, 0 updates 43 keepalives, 0 route refresh requests Minimum time between advertisement runs is 30 seconds Minimum time before advertisements start is 0 seconds Capabilities received from neighbor for IPv4 Unicast : MULTIPROTO_EXT(1) ROUTE_REFRESH(2) CISCO_ROUTE_REFRESH(128) Capabilities advertised to neighbor for IPv4 Unicast : MULTIPROTO_EXT(1) ROUTE_REFRESH(2) ROUTE_REFRESH(2) GRACEFUL_RESTART(64) CISCO_ROUTE_REFRESH(128) Route map for incoming advertisements is test Maximum prefix set to 4 with threshold 75 For address family: IPv4 Unicast BGP table version 34, neighbor version 34 5 accepted prefixes consume 20 bytes Prefix advertised 0, denied 4, withdrawn 0 Prefixes accepted 1 (consume 4 bytes), withdrawn 0 by peer Prefixes advertised 0, rejected 0, withdrawn 0 from peer Connections established 2; dropped 1 Last reset 00:18:21, due to Maximum prefix limit reached 330 | Border Gateway Protocol IPv4(BGPv4)