Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 599

loopback port-channel tengigabitethernet vlan (OPTIONAL) View information for IPv6 loopback interfaces. (OPTIONAL) View information for IPv6 port channels. (OPTIONAL) View information for an IPv6 tengigabitethernet interface. (OPTIONAL) View information for IPv6 VLANs. Defaults No default values or behavior Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced on the S55. Introduced on E-Series ExaScale Introduced on C-Series Introduced Example Figure 18-5. Command Example: show ipv6 interface Force10#show ipv6 interface gigabitethernet 1/1 GigabitEthernet 1/1 is up, line protocol is up IPV6 is enabled Link Local address: fe80::201:e8ff:fe04:62c4 Global Unicast address(es): 2001::1, subnet is 2001::/64 2002::1, subnet is 2002::/120 2003::1, subnet is 2003::/120 2004::1, subnet is 2004::/32 Global Anycast address(es): Joined Group address(es): ff02::1 ff02::2 ff02::1:ff00:1 ff02::1:ff04:62c4 MTU is 1500 ICMP redirects are not sent DAD is enabled: number of DAD attempts: 1 ND reachable time is 30 seconds ND advertised reachable time is 30 seconds ND advertised retransmit interval is 30 seconds show ipv6 route c e s Displays the IPv6 routes. Syntax Parameter show ipv6 route [ipv6-address prefix-length] [hostname] [all] [bgp as number] [connected] [isis tag] [list prefix-list name] [ospf process-id] [rip] [static] [summary] ipv6-address prefix-length hostname (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the /x format. Range: /0 to /128 The :: notation specifies successive hexadecimal fields of zeros. (OPTIONAL) View information for this IPv6 routes with Host Name IPv6 Basics | 599