Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 1053

Table 43-1. show ntp associations Command Fields Field (none) remote ref clock st when poll reach delay offset disp Description One or more of the following symbols could be displayed: • * means synchronized to this peer • # means almost synchronized to this peer • + means the peer was selected for possible synchronization • - means the peer is a candidate for selection • ~ means the peer is statically configured Displays the remote IP address of the NTP peer. Displays the IP address of the remote peer's reference clock. Displays the peer's stratum, that is, the number of hops away from the external time source. A 16 in this column means the NTP peer cannot reach the time source. Displays the last time the switch received an NTP packet. Displays the polling interval (in seconds). Displays the reachability to the peer (in octal bitstream). Displays the time interval or delay for a packet to complete a round-trip to the NTP time source (in milliseconds). Displays the relative time of the NTP peer's clock to the switch clock (in milliseconds). Displays the dispersion. Related Commands show ntp status Display current NTP status. show ntp status c e s Display the current NTP status. Syntax show ntp status Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on S55 Support added for S-Series Support added for C-Series Introduced for E-Series Example Figure 43-7. show ntp status Command Example Force10#sh ntp sta Clock is synchronized, stratum 2, reference is 100.10.10.10 frequency is -32.000 ppm, stability is 15.156 ppm, precision is 4294967290 reference time is BC242FD5.C7C5C000 (10:15:49.780 UTC Mon Jan 10 2000) clock offset is clock offset msec, root delay is 0.01656 sec root dispersion is 0.39694 sec, peer dispersion is peer dispersion msec peer mode is client Force10# Time and Network Time Protocol (NTP) | 1053