Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 396

www.dell.com | support.dell.com Syntax clear ip dhcp [binding {address} | conflict | server statistics] Parameters binding address conflicts server statistics Enter this keyword to delete all entries in the binding table. Enter the IP address to clear the binding entry for a single IP address. Enter this keyword to delete all of the log entries created for IP address conflicts. Enter this keyword to clear all the server counter information. Command Mode EXEC Privilege Default None Command History Version 8.3.5.0 Version 8.2.1.0 Introduced on the S55. Introduced on C-Series and S-Series. Usage Entering after clear ip dhcp binding, clears all the IPs from the binding table. Information debug ip dhcp server c s Display FTOS debugging messages for DHCP. Syntax debug ip dhcp server [events | packets] Parameters events packet Enter this keyword to display DHCP state changes. Enter this keyword to display packet transmission/reception. Command Mode Default Command History EXEC Privilege None Version 8.3.5.0 Version 8.2.1.0 Introduced on the S55. Introduced on C-Series and S-Series. default-router c s Assign a default gateway to clients based on address pool. Syntax Parameters default-router address [address2...address8] address Enter the a list of routers that may be the default gateway for clients on the subnet. You may specify up to 8. List them in order of preference. Command Mode Default DHCP None 396 | Dynamic Host Configuration Protocol (DHCP)