Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 727

Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 pre-Version 6.1.1.1 Introduced on S55 Introduced support for Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Modified to include the default keyword. Introduced on E-Series Usage Although the passive interface will neither send nor receive routing updates, the network on that Information interface will still be included in OSPF updates sent via other interfaces. The default keyword sets all interfaces as passive. You can then configure individual interfaces, where adjacencies are desired, using the no passive-interface interface command. The no form of this command is inserted into the configuration for individual interfaces when the no passive-interface interface command is issued while passive-interface default is configured. This command behavior has changed as follows: passive-interface interface • The previous no passive-interface interface is removed from the running configuration. • The ABR status for the router is updated. • Save passive-interface interface into the running configuration. passive-interface default • All present and future OSPF interface are marked as passive. • Any adjacency are explicitly terminated from all OSPF interfaces. • All previous passive-interface interface commands are removed from the running configuration. • All previous no passive-interface interface commands are removed from the running configuration. no passive-interface interface • Remove the interface from the passive list. • The ABR status for the router is updated. • If passive-interface default is specified, then save no passive-interface interface into the running configuration. No passive-interface default • Clear everything and revert to the default behavior. • All previously marked passive interfaces are removed. • May update ABR status. redistribute c e s Redistribute information from another routing protocol throughout the OSPF process. Syntax redistribute {connected | rip | static} [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] To disable redistribution, use the no redistribute {connected | isis | rip | static} command. Open Shortest Path First (OSPFv2 and OSPFv3) | 727