Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 489

Example Figure 15-38. show interfaces switchport Command Example Force10#show interfaces switchport Name: GigabitEthernet 13/0 802.1QTagged: Hybrid Vlan membership: Vlan 2, Vlan 20 Native VlanId: 20 Name: GigabitEthernet 13/1 802.1QTagged: True Vlan membership: Vlan 2 Name: GigabitEthernet 13/2 802.1QTagged: True Vlan membership: Vlan 2 Name: GigabitEthernet 13/3 802.1QTagged: True Vlan membership: Vlan 2 --More-- Table 15-9. Items in show interfaces switchport Command Example Items Name 802.1QTagged Vlan membership Description Displays the interface's type, slot and port number. Displays whether if the VLAN tagged ("True"), untagged ("False"), or hybrid ("Hybrid", which supports both untagged and tagged VLANs by port 13/0. Lists the VLANs to which the interface is a member. Starting with FTOS 7.6.1, this field can display native VLAN membership by port 13/0. Related Commands interface show ip interface show interfaces show interfaces transceiver Configure a physical interface on the switch. Displays Layer 3 information about the interfaces. Display information on a specific physical interface or virtual interface. Display the physical status and operational status of an installed transceiver. The output also displays the transceiver's serial number. show interfaces transceiver ces Display the physical status and operational status of an installed transceiver. The output also displays the transceiver's serial number. Syntax show interfaces [gigabitethernet | tengigabitethernet] slot/port transceiver Parameters gigabitethernet tengigabitethernet For a 10/100/1000 interface, enter the keyword gigabitethernet followed by the slot/port information. For a 10G interface, enter the keyword tengigabitethernet followed by the slot/port information. Interfaces | 489