Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 616

www.dell.com | support.dell.com Command History Related Commands Version 8.3.5.0 Version 6.2.1.1 Introduced on the S55. Introduced show lacp show interfaces port-channel Display the LACP information. Display information on configured Port Channel groups. show lacp c e s Display the LACP matrix. Syntax show lacp port-channel-number [sys-id | counters] Parameters port-channel-number sys-id counters Enter the port-channel number to display the LACP matrix. C-Series and S-Series Range: 1-128 E-Series Range: 1-255 for TeraScale (OPTIONAL) Enter the keyword sys-id and the value that identifies a system. (OPTIONAL) Enter the keyword counters to display the LACP counters. Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Version 7.6.1.0 Version 7.5.1.0 Version 6.2.1.1 Introduced on the S55. Support added for S-Series Support added for C-Series Introduced Example 1 Figure 20-1. show lacp port-channel-number command Force10#show lacp 1 Port-channel 1 admin up, oper up, mode lacp Actor System ID: Priority 32768, Address 0001.e800.a12b Partner System ID: Priority 32768, Address 0001.e801.45a5 Actor Admin Key 1, Oper Key 1, Partner Oper Key 1 LACP LAG 1 is an aggregatable link A - Active LACP, B - Passive LACP, C - Short Timeout, D - Long Timeout E - Aggregatable Link, F - Individual Link, G - IN_SYNC, H - OUT_OF_SYNC I - Collection enabled, J - Collection disabled, K - Distribution enabled L - Distribution disabled, M - Partner Defaulted, N - Partner Non-defaulted, O - Receiver is in expired state, P - Receiver is not in expired state Port Gi 10/6 is enabled, LACP is enabled and mode is lacp Actor Admin: State ACEHJLMP Key 1 Priority 128 Oper: State ACEGIKNP Key 1 Priority 128 Partner Admin: State BDFHJLMP Key 0 Priority 0 Oper: State BCEGIKNP Key 1 Priority 128 Force10# 616 | Link Aggregation Control Protocol (LACP)