Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 578

www.dell.com | support.dell.com Example Figure 17-2. Command Example: remark Force10(config-ipv6-acl)#remark 10 Remark for Entry # 10 Force10(config-ipv6-acl)#show config ! ipv6 access-list Acl1 description IPV6 Access-list seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count bytes remark 10 Remark for Entry # 10 seq 10 permit icmp host 3333:: any mobile-advertisement log seq 15 deny tcp any any rst seq 20 permit udp any any gt 100 count !Force10(config-ipv6-acl)# Usage Information The S-Series supports Ingress IPv6 ACLs. The S55 supports both Ingress and Egress IPv6 ACLs. As shown in the example above, the same sequence number is used for the remark and an ACL rule. The remark will precede the rule in the running-configuration because it is assumed that the remark is for that rule or that group of rules that follow the remark. You can configure up to 4294967290 remarks in a given ACL. Related Commands show config Display the current ACL configuration. resequence access-list c e s Re-assign sequence numbers to entries of an existing access-list. Syntax resequence access-list {ipv4 | ipv6 | mac} {access-list-name StartingSeqNum Step-to-Increment} Parameters ipv4 |ipv6 | mac access-list-name StartingSeqNum Step-to-Increment Enter the keyword ipv4, ipv6 or mac to identify the access list type to resequence. Enter the name of a configured IP access list, up to 140 characters. Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Enter the starting sequence number to resequence. Range: 0 - 4294967290 Enter the step to increment the sequence number. Range: 1 - 4294967290 Defaults No default values or behavior Command Modes EXEC EXEC Privilege Command History Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced support on the E-Series ExaScale Introduced support on the C-Series Introduced support on the E-Series 578 | IPv6 Access Control Lists (IPv6 ACLs)