Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 1036

www.dell.com | support.dell.com Example Figure 42-3. show spanning-tree Command Example Force10#show spann 0 Executing IEEE compatible Spanning Tree Protocol Bridge Identifier has priority 32768, Address 0001.e800.0a56 Configured hello time 2, max age 20, forward delay 15 We are the root of the spanning tree Current root has priority 32768 address 0001.e800.0a56 Topology change flag set, detected flag set Number of topology changes 1 last change occurred 0:00:05 ago from GigabitEthernet 1/3 Timers: hold 1, topology change 35 hello 2, max age 20, forward_delay 15 Times: hello 1, topology change 1, notification 0, aging 2 Port 26 (GigabitEthernet 1/1) is Forwarding Port path cost 4, Port priority 8, Port Identifier 8.26 Designated root has priority 32768, address 0001.e800.0a56 Designated bridge has priority 32768, address 0001.e800.0a56 Designated port id is 8.26, designated path cost 0 Timers: message age 0, forward_delay 0, hold 0 Number of transitions to forwarding state 1 BPDU: sent:18, received 0 The port is not in the portfast mode Port 27 (GigabitEthernet 1/2) is Forwarding Port path cost 4, Port priority 8, Port Identifier 8.27 Designated root has priority 32768, address 0001.e800.0a56 Designated bridge has priority 32768, address 0001.e800.0a56 Designated port id is 8.27, designated path cost 0 Timers: message age 0, forward_delay 0, hold 0 Number of transitions to forwarding state 1 BPDU: sent:18, received 0 The port is not in the portfast mode Port 28 (GigabitEthernet 1/3) is Forwarding Port path cost 4, Port priority 8, Port Identifier 8.28 Designated root has priority 32768, address 0001.e800.0a56 Designated bridge has priority 32768, address 0001.e800.0a56 Designated port id is 8.28, designated path cost 0 Timers: message age 0, forward_delay 0, hold 0 Number of transitions to forwarding state 1 BPDU: sent:31, received 0 The port is not in the portfast mode Force10# Table 42-1. show spanning-tree Command Example Information Field "Bridge Identifier..." "Configured hello..." "We are..." "Current root..." "Topology flag..." "Number of..." Description Lists the bridge priority and the MAC address for this STP bridge. Displays the settings for hello time, max age, and forward delay. States whether this bridge is the root bridge for the STG. Lists the bridge priority and MAC address for the root bridge. States whether the topology flag and the detected flag were set. Displays the number of topology changes, the time of the last topology change, and on what interface the topology change occurred. 1036 | Spanning Tree Protocol (STP)