Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 539
show ip cam linecard, show hosts Command Example, Table 16-6.
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 539 highlights
Example Figure 16-9. show hosts Command Example Force10#show hosts Default domain is not set Name/address lookup uses static mappings Name servers are not set Host Flags TTL -------- ----- ---- ks (perm, OK) - 4200-1 (perm, OK) - 1230-3 (perm, OK) - ZZr (perm, OK) - Z10-3 (perm, OK) - Force10# Type ---- IP IP IP IP IP Address ------2.2.2.2 192.68.69.2 192.68.99.2 192.71.18.2 192.71.23.1 Table 16-6. show hosts Command Example Fields Field Default domain... Name/address lookup... Name servers are... Host Flags TTL Type Address Description Displays the domain name (if configured). States if DNS is enabled on the system. If DNS is enabled, the Name/Address lookup is domain service. If DNS is not enabled, the Name/Address lookup is static mapping. Lists the name servers, if configured. Displays the host name assigned to the IP address. Classifies the entry as one of the following: • perm - the entry was manually configured and will not time out • temp - the entry was learned and will time out after 72 hours of inactivity. Also included in the flag is an indication of the validity of the route: • ok - the entry is valid. • ex - the entry expired. • ?? - the entry is suspect. Displays the amount of time until the entry ages out of the cache. For dynamically learnt entries only. Displays IP as the type of entry. Displays the IP address(es) assigned to the host. Related Commands traceroute ip host View DNS resolution Configure a host. show ip cam linecard c e View CAM entries for a port pipe on a line card. Syntax show ip cam linecard number port-set pipe-number [ip-address mask [longer-prefixes] | index index-number | summary | vrf vrf instance] IPv4 Routing | 539