Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 32

www.dell.com | support.dell.com Parameters file-url Enter the following location keywords and information: • To copy a file from the internal FLASH, enter flash:// followed by the filename. • To copy a file on an FTP server, enter ftp://user:password@hostip/filepath • To copy a file from the internal FLASH on RPM0, enter rpm0flash://filepath • To copy a file from the external FLASH on RPM0, enter rpm0slot0://filepath • To copy a file from the internal FLASH on RPM1, enter rpm1flash://filepath • To copy a file from the external FLASH on RPM1, enter rpm1slot0://filepath • To copy the running configuration, enter the keyword running-config. • To copy the startup configuration, enter the keyword startup-config. • To copy using Secure Copy (SCP), enter the keyword scp: (If scp: is entered in the source position, then enter the target URL; If scp: is entered in the target position, first enter the source URL; see below for examples.) • To copy a file on the external FLASH, enter slot0:// followed by the filename. • To copy a file on a TFTP server, enter tftp://hostip/filepath ExaScale only • To copy a file from a USB drive on RPM0, enter rpm0usbflash://filepath ExaScale and S55 • To copy a file from an external USB drive, enter usbflash://filepath Command Modes EXEC Privilege Command History Version 8.3.5.0 Introduced on the S55. Version 8.2.1.0 Added usbflash and rpm0usbflash commands on E-Series ExaScale Version 7.6.1.0 Introduced on S-Series and added SSH port number to SCP prompt sequence on all systems. Version 7.5.1.0 Introduced on C-Series E-Series original Command Usage FTOS supports a maximum of 100 files, at the root directory level, on both the internal and external Information Flash. The usbflash and rpm0usbflash commands are supported on E-Series ExaScale platform only. Refer to the FTOS Release Notes for a list of approved USB vendors. When copying a file to a remote location (for example, using Secure Copy (SCP)), enter only the keywords and FTOS prompts you for the rest of the information. For example, when using SCP, you can enter copy running-config scp: The running-config is the source, and the target is specified in the ensuing prompts. FTOS prompts you to enter any required information, as needed for the named destination-remote destination, destination filename, user ID and password, etc. When you use the copy running-config startup-config command to copy the running configuration (the startup configuration file amended by any configuration changes made since the system was started) to the startup configuration file, FTOS creates a backup file on the internal flash of the startup configuration. FTOS supports copying the running-configuration to a TFTP server or to an FTP server: 32 | File Management