Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 295

Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S55. Introduced support on S-Series Introduced on C-Series and E-Series neighbor default-originate c e s Inject the default route to a BGP peer or neighbor. Syntax neighbor {ip-address | peer-group-name} default-originate [route-map map-name] To remove a default route, use the no neighbor {ip-address | peer-group-name} default-originate command. Parameters ip-address peer-group-name route-map map-name Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to set the default route of all routers in that peer group. (OPTIONAL) Enter the keyword route-map followed by the name of a configured route map. Defaults Not configured. Command Modes ROUTER BGP Usage If you apply a route map to a BGP peer or neighbor with the neighbor default-originate command Information configured, the software does not apply the set filters in the route map to that BGP peer or neighbor. Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S55. Introduced support on S-Series Introduced support on C-Series neighbor description c e s Assign a character string describing the neighbor or group of neighbors (peer group). Syntax neighbor {ip-address | peer-group-name} description text To delete a description, use the no neighbor {ip-address | peer-group-name} description command. Parameters ip-address peer-group-name text Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group. Enter a continuous text string up to 80 characters. Defaults Not configured. Command Modes ROUTER BGP Border Gateway Protocol IPv4(BGPv4) | 295