Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 880
show config Command Example in ROUTER RIP Mode
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 880 highlights
www.dell.com | support.dell.com Example Figure 33-2. show config Command Example in ROUTER RIP Mode Force10(conf-router_rip)#show config ! router rip network 172.31.0.0 passive-interface GigabitEthernet 0/1 Force10(conf-router_rip)# show ip rip database c e s Display the routes learned by RIP. If the switch learned no RIP routes, no output is generated. Syntax show ip rip database [ip-address mask] Parameters ip-address mask (OPTIONAL) Specify an IP address in dotted decimal format to view RIP information on that network only. If you enter an IP address, you must also enter a mask for that IP address. (OPTIONAL) Specify a mask, in /network format, for the IP address. Command Modes EXEC Privilege Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.6.1.0 pre-Version 6.2.1.1 Introduced on S55 Introduced on S-Series Introduced on C-Series Introduced on E-Series Example Figure 33-3. show ip rip database Command Example (partial) Force10#show ip rip database Total number of routes in RIP database: 1624 204.250.54.0/24 [50/1] via 192.14.1.3, 00:00:12, GigabitEthernet 9/15 204.250.54.0/24 auto-summary 203.250.49.0/24 [50/1] via 192.13.1.3, 00:00:12, GigabitEthernet 9/14 203.250.49.0/24 auto-summary 210.250.40.0/24 [50/2] via 1.1.18.2, 00:00:14, Vlan 18 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 210.250.40.0/24 auto-summary 207.250.53.0/24 [50/2] via 1.1.120.2, 00:00:55, Port-channel 20 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 [50/2] via 1.1.10.2, 00:00:18, Vlan 10 207.250.53.0/24 auto-summary 208.250.42.0/24 [50/2] via 1.1.120.2, 00:00:55, Port-channel 20 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 [50/2] via 1.1.10.2, 00:00:18, Vlan 10 208.250.42.0/24 auto-summary 880 | Router Information Protocol (RIP)