Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 710

www.dell.com | support.dell.com Table 26-1. Output Descriptions for debug ip ospf process-id packet Field rid: aid: chk: aut: auk: keyid: to: dst: netmask: pri: N, MC, E, T hi: di: dr: bdr: Description Displays the OSPF router ID. Displays the Autonomous System ID. Displays the OSPF checksum. States if OSPF authentication is configured. One of the following is listed: • 0 - no authentication configured • 1 - simple authentication configured using the ip ospf authentication-key command) • 2 - MD5 authentication configured using the ip ospf message-digest-key command. If the ip ospf authentication-key command is configured, this field displays the key used. If the ip ospf message-digest-key command is configured, this field displays the MD5 key Displays the interface to which the packet is intended. Displays the destination IP address. Displays the destination IP address mask. Displays the OSPF priority Displays information available in the Options field of the HELLO packet: • N + (N-bit is set) • N - (N-bit is not set) • MC+ (bit used by MOSPF is set and router is able to forward IP multicast packets) • MC- (bit used by MOSPF is not set and router cannot forward IP multicast packets) • E + (router is able to accept AS External LSAs) • E - (router cannot accept AS External LSAs) • T + (router can support TOS) • T - (router cannot support TOS) Displays the amount of time configured for the HELLO interval. Displays the amount of time configured for the DEAD interval. Displays the IP address of the designated router. Displays the IP address of the Border Area Router. default-information originate c e s Configure the FTOS to generate a default external route into an OSPF routing domain. Syntax default-information originate [always] [metric metric-value] [metric-type type-value] [route-map map-name] To return to the default values, enter no default-information originate. Parameters always metric metric-value (OPTIONAL) Enter the keyword always to specify that default route information must always be advertised. (OPTIONAL) Enter the keyword metric followed by a number to configure a metric value for the route. Range: 1 to 16777214 710 | Open Shortest Path First (OSPFv2 and OSPFv3)