Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 56

www.dell.com | support.dell.com Parameters bootflash-image bootselector-image system-image all linecard number Enter the keyword bootflash-image to upgrade the bootflash image. Enter the keyword bootselector-image to upgrade the boot selector image. Use with TAC supervision only. Enter the keyword system-image to upgrade the system image. Use with TAC supervision only. Enter the keyword all to upgrade the bootflash or boot selector image on all processors. This keyword does not upgrade the bootflash on the standby RPM. Enter the keyword all after the keyword linecard to upgrade the bootflash or boot selector image on all linecards. rpm repair booted file-url Enter the keyword rpm to upgrade the system image of a selector image on all processors on the RPM. Enter this keyword to upgrade a line card newly inserted into an already upgraded chassis. This option is only available with the system-image keyword. Upgrade the bootflash or bootselector image using the currently running FTOS image. Enter the following location keywords and information to upgrade using an FTOS image other than the one currently running: • To specify an FTOS image on the internal flash, enter flash:// file-path/filename. • To specify an FTOS image on an FTP server, enter ftp:// user:password@hostip/filepath • To specify an FTOS image on the external flash on the primary RPM, slot0://file-path/filename • To copy a file on a TFTP server, enter tftp://hostip/filepath/ filename Defaults FTOS uses the boot flash image that was packed with it if no URL is specified. Command Modes EXEC Privilege Command History Version 7.7.1.0 Introduced system-image option Version 7.5.1.0 Introduced on C-Series E-Series original Command Usage A system message appears stating the Bootflash upgrade status. Reload the system to boot from the Information upgraded boot images. 56 | File Management