Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 834

www.dell.com | support.dell.com Usage Information Related Commands rate-shape can be applied only as an aggregate policy. If it is applied as a class-based policy, then rate-shape will not take effect. rate shape qos-policy-output Shape the traffic output of the selected interface. Create a QoS output policy. service-policy input c e s Apply an input policy map to the selected interface. Syntax service-policy input policy-map-name [layer2] To remove the input policy map from the interface, use the no service-policy input policy-map-name [layer2] command. Parameters policy-map-name layer2 Enter the name for the policy map in character format (16 characters maximum). You can identify an existing policy map or name one that does not yet exist. (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. Default: Layer 3 Defaults Layer 3 Command Modes INTERFACE Command History Version 8.3.5.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 pre-Version 6.1.1.1 Introduced on S55 Introduced on S-Series Introduced on C-Series E-Series Only: Expanded to add support for Layer 2 Introduced on E-Series Usage A single policy-map can be attached to one or more interfaces to specify the service-policy for those Information interfaces. A policy map attached to an interface can be modified. Related Commands Note: The service-policy commands are not allowed on a port channel. The service-policy input policy-map-name command and the service-class dynamic dot1p command are not allowed simultaneously on an interface. However, the service-policy input command (without the policy-map-name option) and the service-class dynamic dot1p command are allowed on an interface. policy-map-input Create an input policy map. 834 | Quality of Service (QoS)