Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 446

www.dell.com | support.dell.com Example Figure 15-1. clear counters Command Example Force10#clear counters Clear counters on all interfaces [confirm] Related Commands mac learning-limit show interfaces Allow aging of MACs even though a learning-limit is configured or disallow station move on learnt MACs. Displays information on the interfaces. clear dampening c e s Clear the dampening counters on all the interfaces or just the specified interface. Syntax clear dampening [interface] Parameters interface (Optional) Enter one of the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a port channel interface, enter the keyword port-channel followed by a number: C-Series Range: 1-128 E-Series Range: 1 to 255 for TeraScale and ExaScale • For a SONET interface, enter the keyword sonet followed by the slot/ port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. Defaults Without a specific interface specified, the command clears all interface dampening counters Command Modes EXEC Privilege Command History Version 8.3.5.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Introduced on the S55. Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Introduced on E-Series Example Force10#clear dampening gigabitethernet 1/2 Clear dampening counters on Gi 1/2 [confirm] y Force10# Related Commands show interfaces dampening dampening Display interface dampening information. Configure dampening on an interface. 446 | Interfaces