Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 442

www.dell.com | support.dell.com Command History Version 8.3.5.0 Introduced on the S55. Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series legacy command Usage Information This command enables the IGMP switch to send General Queries periodically. This is useful when there is no multicast router present in the VLAN because the multicast traffic does not need to be routed. An IP address must be assigned to the VLAN interface for the switch to act as a querier for this VLAN. show ip igmp snooping mrouter c e s Display multicast router interfaces. Syntax show ip igmp snooping mrouter [vlan number] Parameters vlan number Enter the keyword vlan followed by the vlan number. Range: 1-4094 Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Introduced on the S55 Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series legacy command Example Figure 14-3. show ip igmp snooping mrouter Command Example Force10#show ip igmp snooping mrouter Interface Router Ports Vlan 2 Gi 13/3, Po 1 Force10# Related Commands show ip igmp groups Use this IGMP command to view groups 442 | Internet Group Management Protocol (IGMP)