Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 584

www.dell.com | support.dell.com Table 17-2. show ip accounting access-lists Command Example Field Field "Ingress IPv6..." "seq 10 ..." Description Displays the name of the IPv6 ACL, in this example "AclList1". Displays the filter. If the keywords count or byte were configured in the filter, the number of packets or bytes processed by the filter is displayed at the end of the line. show running-config acl c e s Display the ACL running configuration. Syntax show running-config acl Command Modes EXEC EXEC Privilege Command History Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced support on the E-Series ExaScale Introduced support on the C-Series Introduced support on the E-Series Usage Information The S-Series supports Ingress IPv6 ACLs. The S55 supports both Ingress and Egress IPv6 ACLs. Example Figure 17-7. Command Example: show running-config acl Force10#show running-config acl ! ip access-list extended ext-acl1 ! ip access-list standard std-acl1 ! ipv6 access-list Acl1 description IPV6 Access-list seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count bytes remark 10 Remark for Entry # 10 seq 10 permit icmp host 3333:: any mobile-advertisement log seq 15 deny tcp any any rst seq 20 permit udp any any gt 100 count !Force10# test cam-usage c e Verify that enough ACL CAM space is available for the IPv6 ACLs you have created. Syntax test cam-usage service-policy input input policy name linecard {number | all} 584 | IPv6 Access Control Lists (IPv6 ACLs)