Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 773
Table 27-3., show ip pim tib Command Example Fields, continued, S = PIM Sparse Mode
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 773 highlights
Table 27-3. show ip pim tib Command Example Fields (continued) Field flags Incoming interface RPF neighbor Outgoing interface list: Description List the flags to define the entries: • D = PIM Dense Mode • S = PIM Sparse Mode • C = directly connected • L = local to the multicast group • P = route was pruned • R = the forwarding entry is pointing toward the RP • F = FTOS is registering this entry for a multicast source • T = packets were received via Shortest Tree Path • J = first packet from the last hop router is received and the entry is ready to switch to SPT • K = acknowledge pending state Displays the reverse path forwarding (RPF) interface towards the RP/ source. Displays the next hop from this interface towards the RP/source. Lists the interfaces that meet one of the following criteria: • a directly connect member of the Group. • statically configured member of the Group. • received a (*,G) Join message. PIM-Sparse Mode (PIM-SM) | 773