Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 343

• neighbor distribute-list • neighbor filter-list • neighbor maximum-prefix • neighbor next-hop-self • neighbor remove-private-as • neighbor route-map • neighbor route-reflector-client • network • redistribute • redistribute ospf • show ip bgp ipv4 multicast • show ip bgp cluster-list • show ip bgp community • show ip bgp community-list • show ip bgp dampened-paths • show ip bgp filter-list • show ip bgp flap-statistics • show ip bgp inconsistent-as • show ip bgp ipv4 multicast neighbors • show ip bgp peer-group • show ip bgp summary address family ipv4 multicast (MBGP) c et s This command changes the context to SAFI (Subsequent Address Family Identifier). Syntax address family ipv4 multicast To remove SAFI context, use the no address family ipv4 multicast command. Parameters ipv4 multicast Enter the keyword ipv4 to specify the address family as IPV4. Enter the keyword multicast to specify multicast as SAFI. Defaults IPv4 Unicast Command Modes ROUTER BGP (conf-router_bgp) Usage Information All subsequent commands will apply to this address family once this command is executed. You can exit from this AFI/SAFI to the IPv4 Unicast (the default) family by entering exit and returning to the Router BGP context. Command History Version 7.8.1.0 Version 7.7.1.0 Introduced support on S-Series for MBGP IPv4 Multicast Introduced support on C-Series Border Gateway Protocol IPv4(BGPv4) | 343