Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 988

www.dell.com | support.dell.com Related Commands snmp-server community Set the community string. snmp-server user c e s Configure a new user to an SNMP group. Syntax snmp-server user name {group_name remote ip-address udp-port port-number} [1 | 2c | 3] [encrypted] [auth {md5 | sha} auth-password] [priv des56 priv password] [access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name] To remove a user from the SNMP group, use the no snmp-server user name {group_name remote ip-address udp-port port-number} [1 | 2c | 3] [encrypted] [auth {md5 | sha} auth-password ] [priv des56 priv password] [access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name] command. Parameters name group_name remote ip-address udp-port port-number 1 | 2c | 3 encrypted auth md5 | sha auth-password priv des56 Enter the name of the user (not to exceed 20 characters), on the host, that connects to the agent. Enter a text string (up to 20 characters long) as the name of the group. Defaults: The following groups are created for mapping to read/write community/security-names. • v1v2creadu - maps to a community with ro permissions • 1v2cwriteu - maps to a community rw permissions Enter the keyword remote followed by the IP address that identifies the copy of the SNMP on the remote device. Enter the keyword udp-port followed by the UDP (User Datagram Protocol) port number on the remote device. Range: 0 to 65535. Default: 162 (OPTIONAL) Enter the security model version number (1, 2c, or 3). • 1 is the least secure version • 3 is the most secure of the security modes. • 2c allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed. Default: 1 (OPTIONAL) Enter the keyword encrypted to specify the password appear in encrypted format (a series of digits, masking the true characters of the string). (OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption. (OPTIONAL) Enter the keyword md5 or sha to designate the authentication level. md5 - Message Digest Algorithm sha - Secure Hash Algorithm (OPTIONAL) Enter a text string (up to 20 characters long) password that will enable the agent to receive packets from the host. Minimum: 8 characters long (OPTIONAL) Enter the keyword priv des56 to initiate a privacy authentication level setting using the CBC-DES privacy authentication algorithm (des56). 988 | SNMP and Syslog