Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 357

Command Modes Usage Information Command History ROUTER BGP Address Family (conf-router_bgp_af) When you enter redistribute ospf process-id command without any other parameters, FTOS redistributes all OSPF internal routes, external type 1 routes, and external type 2 routes. This feature is not supported by an RFC. Version 7.8.1.0 Version 7.7.1.0 Version 7.6.1.0 Introduced support on S-Series Introduced support on C-Series Introduced IPv6 MGBP support for E-Series show ip bgp ipv4 multicast c et s View the current MBGP routing table for the system. Syntax show ip bgp ipv4 multicast [detail | network [network-mask] [length]] Parameters detail network network-mask longer-prefixes (OPTIONAL) Enter the keyword detail to display BGP internal information for the IPv4 Multicast address family. (OPTIONAL) Enter the network address (in dotted decimal format) of the BGP network to view information only on that network. (OPTIONAL) Enter the network mask (in slash prefix format) of the BGP network address. (OPTIONAL) Enter the keyword longer-prefixes to view all routes with a common prefix. Command Modes EXEC EXEC Privilege Example Figure 8-27. show ip bgp Command Example Force10#show ip bgp ipv4 multicast BGP table version is 14, local router ID is 100.10.10.1 Status codes: s suppressed, S stale, d damped, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network Origin codes: i - IGP, e - EGP, ? - incomplete Network *>I 25.1.0.0/16 *>I 25.2.0.0/16 *>I 25.3.0.0/16 *>r 144.1.0.0/16 *>r 144.2.0.0/16 *>r 144.3.0.0/16 *>n 145.1.0.0/16 Force10# Next Hop 25.25.25.25 25.25.25.26 211.1.1.165 0.0.0.0 100.10.10.10 211.1.1.135 0.0.0.0 Metric 0 0 0 0 0 0 0 LocPrf Weight Path 100 0 i 100 0 ? 100 0 ? 32768 ? 32768 ? 32768 ? 32768 i Border Gateway Protocol IPv4(BGPv4) | 357