Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 581

destination address message-type count byte log monitor Enter the IPv6 address of the network or host to which the packets are sent in the x:x:x:x::x format followed by the prefix length in the /x format. Range: /0 to /128 The :: notation specifies successive hexadecimal fields of zero. (OPTIONAL) Enter an ICMP message type, either with the type (and code, if necessary) numbers or with the name of the message type. Range: 0 to 255 for ICMP type; 0 to 255 for ICMP code (OPTIONAL) Enter the keyword count to count packets processed by the filter. (OPTIONAL) Enter the keyword byte to count bytes processed by the filter. (OPTIONAL) Enter the keyword log to enter ACL matches in the log. Supported on Jumbo-enabled line cards only. (OPTIONAL) Enter the keyword monitor to monitor traffic on the monitoring interface specified in the flow-based monitoring session along with the filter operation. Defaults Not configured. Command Modes ACCESS-LIST Command History Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced support on the E-Series ExaScale Introduced support on the C-Series Added monitor option Usage Information The S-Series supports Ingress IPv6 ACLs. The S55 supports both Ingress and Egress IPv6 ACLs. Related Commands deny permit Configure a filter to drop packets. Configure a filter to forward packets. show cam-acl c s Show space allocated for IPv6 ACLs. Syntax show cam-acl Command Modes Command History EXEC EXEC Privileged Version 8.3.5.0 Version 7.8.1.0 Introduced on the S55. Introduced on the C-Series Related Commands cam-acl Configure CAM profiles to support IPv6 ACLs IPv6 Access Control Lists (IPv6 ACLs) | 581