Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 686

www.dell.com | support.dell.com Example 2 Figure 24-3. show ip mroute Command Example Force10#show ip mroute IP Multicast Routing Table (*, 224.10.10.1), uptime 00:05:12 Incoming interface: GigabitEthernet 3/12 Outgoing interface list: GigabitEthernet 3/13 (1.13.1.100, 224.10.10.1), uptime 00:04:03 Incoming interface: GigabitEthernet 3/4 Outgoing interface list: GigabitEthernet 3/12 GigabitEthernet 3/13 (*, 224.20.20.1), uptime 00:05:12 Incoming interface: GigabitEthernet 3/12 Outgoing interface list: GigabitEthernet 3/4 Force10# Table 24-1. show ip mroute Command Example Fields Field (S,G) uptime Incoming interface Outgoing interface list: Description Displays the forwarding entry in the multicast route table. Displays the amount of time the entry has been in the multicast forwarding table. Displays the reverse path forwarding (RPF) information towards the the source for (S,G) entries and the RP for (*,G) entries. Lists the interfaces that meet one of the following: • a directly connected member of the Group • statically configured member of the Group • received a (*,G) or (S,G) Join message show ip rpf c e s View reverse path forwarding. Syntax show ip rpf Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Introduced on S55 E-Series legacy command Usage Information Static mroutes are used by network administrators to control the reachability of the multicast sources. If a PIM registered multicast source is reachable via static mroute as well as unicast route, the distance of each route is examined and the route with shorter distance is the one the PIM selects for reachability. Note: The default distance of mroutes is zero (0) and is CLI configurable on a per route basis. 686 | Multicast