Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 301

neighbor next-hop-self c e s Enables you to configure the router as the next hop for a BGP neighbor. (This command is used for IBGP). Syntax neighbor {ip-address | peer-group-name} next-hop-self To return to the default setting, use the no neighbor {ip-address | peer-group-name} next-hop-self command. Parameters ip-address peer-group-name Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group. Defaults Disabled. Command Modes ROUTER BGP Usage If the set next-hop command in the ROUTE-MAP mode is configured, its configuration takes Information precedence over the neighbor next-hop-self command. Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S55. Introduced support on S-Series Introduced support on C-Series neighbor password c e s Enable Message Digest 5 (MD5) authentication on the TCP connection between two neighbors. Syntax neighbor {ip-address | peer-group-name} password [encryption-type] password To delete a password, use the no neighbor {ip-address | peer-group-name} password command. Parameters ip-address peer-group-name encryption-type password Enter the IP address of the router to be included in the peer group. Enter the name of a configured peer group. (OPTIONAL) Enter 7 as the encryption type for the password entered. 7 means that the password is encrypted and hidden. Enter a text string up to 80 characters long. The first character of the password must be a letter. You cannot use spaces in the password. Defaults Not configured. Command Modes ROUTER BGP Usage Information Configure the same password on both BGP peers or a connection does not occur. When you configure MD5 authentication between two BGP peers, each segment of the TCP connection between them is verified and the MD5 digest is checked on every segment sent on the TCP connection. Configuring a password for a neighbor will cause an existing session to be torn down and a new one established. Border Gateway Protocol IPv4(BGPv4) | 301