Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 1080

www.dell.com | support.dell.com Command Mode Command History Related Commands EXEC Privilege H Version 8.3.5.0 Version 7.7.1.0 Introduced on the S55. Introduced on S-Series show environment (S-Series) View S-Series system component status (for example, temperature, voltage). Buffer Tuning Commands The buffer tuning commands are: • buffer (Buffer Profile) • buffer (Configuration) • buffer-profile (Configuration) • buffer-profile (Interface) • show buffer-profile • show buffer-profile interface Warning: Altering the buffer allocations is a sensitive operation. Do not use any buffer tuning commands without first contacting then Dell Force10 Technical Assistance Center. buffer (Buffer Profile) c s Allocate an amount of dedicated buffer space, dynamic buffer space, or packet pointers to queues 0 to 3. Syntax buffer [dedicated | dynamic | packets-pointers] queue0 number queue1 number queue2 number queue3 number Parameters dedicated dynamic packets-pointers queue0 number Enter this keyword to configure the amount of dedicated buffer space per queue. Enter this keyword to configure the amount of dynamic buffer space per Field Processor. Enter this keyword to configure the number of packet pointers per queue. Enter this keyword to allocate an amount of buffer space or packet pointers to Queue 0. Dedicated Buffer Range: 0-2013 Dynamic Buffer Range: FP: 0-2013 CSF: 0-131200 (in multiples of 80) Packet Pointer Range: 0-2047 1080 | S-Series Debugging and Diagnostics