Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 728

www.dell.com | support.dell.com Parameters Defaults Command Modes Command History connected rip static metric metric-value metric-type type-value route-map map-name tag tag-value Not configured. ROUTER OSPF Enter the keyword connected to specify that information from active routes on interfaces is redistributed. Enter the keyword rip to specify that RIP routing information is redistributed. Enter the keyword static to specify that information from static routes is redistributed. (OPTIONAL) Enter the keyword metric followed by a number. Range: 0 (zero) to 16777214. (OPTIONAL) Enter the keyword metric-type followed by one of the following: • 1 = OSPF External type 1 • 2 = OSPF External type 2 (OPTIONAL) Enter the keyword route-map followed by the name of the route map. (OPTIONAL) Enter the keyword tag followed by a number. Range: 0 to 4294967295 Version 8.3.5.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S55 Introduced support for Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series Usage To redistribute the default route (0.0.0.0/0), configure the default-information originate command. Information Related Commands default-information originate Generate a default route into the OSPF routing domain. redistribute bgp c e s Redistribute BGP routing information throughout the OSPF instance. Syntax redistribute bgp as number [metric metric-value] | [metric-type type-value] | [tag tag-value] To disable redistribution, use the no redistribute bgp as number [metric metric-value] | [metric-type type-value] [route-map map-name] [tag tag-value] command. Parameters as number metric metric-value Enter the autonomous system number. Range: 1 to 65535 (OPTIONAL) Enter the keyword metric followed by the metric-value number. Range: 0 to16777214 728 | Open Shortest Path First (OSPFv2 and OSPFv3)