Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 392

www.dell.com | support.dell.com Example The following examples show some sample output when using the test cam-usage command. Figure 10-9. Command Example: test cam-usage (C-Series) Force10#test cam-usage service-policy input LauraMapTest linecard all Linecard | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status 2 | 1 | IPv4Flow | 232 | 0 | Allowed 2 | 1 | IPv6Flow | 0 | 0 | Allowed 4 | 0 | IPv4Flow | 232 | 0 | Allowed 4 | 0 | IPv6Flow | 0 | 0 | Allowed Force10# Force10#test cam-usage service-policy input LauraMapTest linecard 4 port-set 0 Linecard | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status 4 | 0 | IPv4Flow | 232 | 0 | Allowed 4 | 0 | IPv6Flow | 0 | 0 | Allowed Force10# Force100#test cam-usage service-policy input LauraMapTest linecard 2 port-set 1 Linecard | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status 2 | 1 | IPv4Flow | 232 | 0 | Allowed 2 | 1 | IPv6Flow | 0 | 0 | Allowed Force10# Table 10-1. Output Explanations: test cam-usage (C-Series) Term Linecard Portpipe CAM Partition Available CAM Estimated CAM per Port Status Explanation Lists the line card or linecards that are checked. Entering all shows the status for linecards in the chassis Lists the portpipe (port-set) or port pipes (port-sets) that are checked. Entering all shows the status for linecards and port-pipes in the chassis. Shows the CAM profile of the CAM Identifies the amount of CAM space remaining for that profile Estimates the amount of CAM space the listed policy will require. Indicates whether or not the policy will be allowed in the CAM 392 | Content Addressable Memory (CAM)