Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 1029

42 Spanning Tree Protocol (STP) Overview The commands in this chapter configure and monitor the IEEE 802.1d Spanning Tree protocol (STP) and are supported on all three Dell Force10 switch/routing platforms, as indicated by the c, e, and s characters under the command headings: Commands • bridge-priority • bpdu-destination-mac-address • debug spanning-tree • description • disable • forward-delay • hello-time • max-age • protocol spanning-tree • show config • show spanning-tree 0 • spanning-tree bridge-priority c e s Set the bridge priority of the switch in an IEEE 802.1D Spanning Tree. Syntax bridge-priority {priority-value | primary | secondary} To return to the default value, enter no bridge-priority. Parameters priority-value primary secondary Enter a number as the bridge priority value. Range: 0 to 65535. Default: 32768. Enter the keyword primary to designate the bridge as the root bridge. Enter the keyword secondary to designate the bridge as a secondary root bridge. Spanning Tree Protocol (STP) | 1029