Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 741

Related Commands show ip ospf database Displays OSPF database information. show ip ospf database nssa-external c e s Display NSSA-External (type 7) LSA information. Syntax Parameters show ip ospf database nssa-external [link-state-id] [adv-router ip-address] link-state-id adv-router ip-address (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes Command History EXEC EXEC Privilege Version 8.3.5.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S55 Introduced support of Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series Related Commands show ip ospf database Displays OSPF database information. show ip ospf database opaque-area c e s Display the opaque-area (type 10) LSA information. Syntax show ip ospf process-id database opaque-area [link-state-id] [adv-router ip-address] Parameters process-id link-state-id adv-router ip-address Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC Open Shortest Path First (OSPFv2 and OSPFv3) | 741