Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 563

Ranges for the CAM profiles are 1-10, except for the ipv6acl profile which is 0-10. The ipv6acl allocation must be a factor of 2 (2, 4, 6, 8, 10). clear counters ipv6 access-group c e s Erase all counters maintained for the IPv6 access lists. Syntax clear counters ipv6 access-group [access-list-name] Parameters access-list-name (OPTIONAL) Enter the name of a configured access-list, up to 140 characters. Command Modes EXEC EXEC Privilege Command History Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced support on the E-Series ExaScale Introduced support on the C-Series Introduced support on the E-Series Added monitor option Usage Information The S-Series supports Ingress IPv6 ACLs. The S55 supports both Ingress and Egress IPv6 ACLs. deny c e s Configure a filter that drops IPv6 packets that match the filter criteria. Syntax deny {ipv6-protocol-number | icmp | ipv6 | tcp | udp} To remove this filter, you have two choices: • Use the no seq sequence-number command syntax if you know the filter's sequence number or • Use the no deny {ipv6-protocol-number | icmp | ipv6 | tcp | udp} command. Parameters ip-protocol-number icmp ipv6 tcp udp Enter an IPv6 protocol number. Range: 0 to 255 Enter the keyword icmp to deny Internet Control Message Protocol version 6. Enter the keyword ipv6 to deny any Internet Protocol version 6. Enter the keyword tcp to deny the Transmission Control protocol. Enter the keyword udp to deny the User Datagram Protocol. Defaults Not configured. Command Modes ACCESS-LIST Command History Version 8.2.1.0 Introduced support on the E-Series ExaScale IPv6 Access Control Lists (IPv6 ACLs) | 563