Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 544
show ip fib stack-unit, show ip fib linecard Command Example, Table 16-10.
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 544 highlights
www.dell.com | support.dell.com Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on C-Series Introduced for E-Series Example Figure 16-13. show ip fib linecard Command Example Force10>show ip fib linecard 12 Destination Gateway First-Hop 3.0.0.0/8 via 100.10.10.10, So 2/8 100.10.10.10 3.0.0.0/8 via 101.10.10.10, So 2/9 100.10.10.0/24 Direct, So 2/8 0.0.0.0 100.10.10.1/32 via 127.0.0.1 127.0.0.1 100.10.10.10/32 via 100.10.10.10, So 2/8 100.10.10.10 101.10.10.0/24 Direct, So 2/9 0.0.0.0 101.10.10.1/32 via 127.0.0.1 127.0.0.1 101.10.10.10/32 via 101.10.10.10, So 2/9 101.10.10.10 Force10> Mac-Addr Port VId Index EC 00:01:e8:00:03:ff So 2/8 0 60260 0 00:01:e8:00:03:ff So 2/8 0 11144 0 00:00:00:00:00:00 CP 0 3276 0 00:01:e8:00:03:ff So 2/8 0 0 0 00:00:00:00:00:00 RP2 0 11145 0 00:00:00:00:00:00 CP 0 3277 0 00:01:e8:01:62:32 So 2/9 0 1 0 Table 16-10. show ip fib linecard Command Example Fields Field Destination Gateway First-Hop Mac-Addr Port VId Index EC Description Lists the destination IP address. Displays either the word direct and an interface for a directly connected route or the remote IP address to be used to forward the traffic. Displays the first hop IP address. Displays the MAC address. Displays the egress-port information. Displays the VLAN ID. If no VLAN is assigned, zero (0) is listed. Displays the internal interface number. Displays the number of ECMP paths. Related Commands clear ip fib stackunit Clear FIB entries on a specified line card. show ip fib stack-unit s View all Forwarding Information Base (FIB) entries. Syntax show ip fib stack-unit id [ip-address [mask] [longer-prefixes] | summary] Parameters id ip-address mask Enter the S-Series stack unit ID.Unit ID range: S55: 0-11 all other S-Series: 0-7 (OPTIONAL) Enter the IP address of the network destination to view only information on that destination. Enter the IP address in dotted decimal format (A.B.C.D). You must enter the mask in slash prefix format (/X). 544 | IPv4 Routing