Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 405

ip dhcp snooping database c e s Delay writing the binding table for a specified time. Syntax ip dhcp snooping database write-delay minutes Parameters minutes Range: 5-21600 Command Modes Default CONFIGURATION None Command History Version 8.3.5.0 Version 8.3.1.0 Version 7.8.1.0 Introduced on the S55. Introduced on E-Series. Introduced on C-Series and S-Series ip dhcp snooping binding c e s Create a static entry in the DHCP binding table. Syntax [no] ip dhcp snooping binding mac address vlan-id vlan-id ip ip-address interface type slot/ port lease number Parameters mac address vlan-id vlan-id ip ip-address interface type slot/port lease time Enter the keyword mac followed by the MAC address of the host to which the server is leasing the IP address. Enter the keyword vlan-id followed by the VLAN to which the host belongs. Range: 2-4094 Enter the keyword ip followed by the IP address that the server is leasing. Enter the keyword interface followed by the type of interface to which the host is connected. • For an 10/100 Ethernet interface, enter the keyword fastethernet. • For a Gigabit Ethernet interface, enter the keyword gigabitethernet. • For a SONET interface, enter the keyword sonet. • For a Ten Gigabit Ethernet interface, enter the keyword tengigabitethernet. Enter the slot and port number of the interface. Enter the keyword lease followed by the amount of time the IP address will be leased. Range: 1-4294967295 Command Modes EXEC Default EXEC Privilege None Dynamic Host Configuration Protocol (DHCP) | 405