Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 845

Usage Information The show qos statistics command can be used on the C-Series, but the wred-profile keyword must be omitted in the syntax. The show qos statistics output differs from the ED and EE series line cards and the EF series line cards. The QoS statistics for the EF series generates two extra columns, Queued Pkts and Dropped Pkts, see Example 2. Note: The show qos statistics command displays Matched Packets and Matched Bytes. The show queue statistics egress command (E-Series only) displays Queued Packets and Queued Bytes. The following example explains how these two displays relate to each other. • 9000 byte size packets are sent from Interface A to Interface B. • The Matched Packets on Interface A are equal to the Queued Packets on Interface B. • Matched bytes on Interface A = matched packets *9000 • Queued bytes on Interface B = queued packets *(9020)-Each packet has an additional header of 20 bytes. Example 1 Figure 32-18. show qos statistics Command Output (ED and EE Series of E-Series) Force10#show qos statistics Interface Gi 0/0 Queue# Queued Bytes 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 Matched Pkts 0 0 0 0 0 0 0 0 Matched Bytes 0 0 0 0 0 0 0 0 Interface Gi 0/1 Queue# Queued Bytes 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 Matched Pkts 0 0 0 0 0 0 0 0 Matched Bytes 0 0 0 0 0 0 0 0 Table 32-4. show qos statistics Command Example Fields (ED and EE Series) Field Queue # Queued Bytes Matched Pkts Matched Bytes Description Queue Number Snapshot of the byte count in that queue. The number of packets that matched the class-map criteria. Note: When trust is configured, matched packet counters are not incremented in this field. The number of bytes that matched the class-map criteria. Note: When trust is configured, matched byte counters are not incremented in this field. Quality of Service (QoS) | 845