Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 558

www.dell.com | support.dell.com Related Commands show ip cam stack-unit Display the CAM table show tcp statistics c e s View information on TCP traffic through the switch. Syntax show tcp statistics {all | cp | rp1 | rp2} Parameters all cp rp1 rp2 Enter the keyword all to view all TCP information. Enter the keyword cp to view only TCP information from the Control Processor. Enter the keyword rp1 to view only TCP statistics from Route Processor 1. Enter the keyword rp2 to view only TCP statistics from Route Processor 2. Command Modes EXEC Privilege Command History Version 8.3.5.0 Version 8.1.1.0 Version 6.4.1.0 Introduced on the S55. Introduced on E-Series ExaScale Introduced Example Figure 16-26. show tcp statistics cp Command Example Force10#show tcp stat cp Control Processor TCP: Rcvd: 10585 Total, 0 no port 0 checksum error, 0 bad offset, 0 too short 329 packets (1263 bytes) in sequence 17 dup packets (6 bytes) 0 partially dup packets (0 bytes) 7 out-of-order packets (0 bytes) 0 packets ( 0 bytes) with data after window 0 packets after close 0 window probe packets, 41 window update packets 41 dup ack packets, 0 ack packets with unsend data 10184 ack packets (12439508 bytes) Sent: 12007 Total, 0 urgent packets 25 control packets (including 24 retransmitted) 11603 data packets (12439677 bytes) 24 data packets (7638 bytes) retransmitted 355 ack only packets (41 delayed) 0 window probe packets, 0 window update packets 7 Connections initiated, 8 connections accepted, 15 connections established 14 Connections closed (including 0 dropped, 0 embryonic dropped) 20 Total rxmt timeout, 0 connections dropped in rxmt timeout 0 Keepalive timeout, 0 keepalive probe, 0 Connections dropped in keepalive Force10# 558 | IPv4 Routing