Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 542

www.dell.com | support.dell.com Table 16-8. show ip cam summary Command Example Fields Field Prefix Length Current Use Initial Size Description Displays the prefix-length or mask for the IP address configured on the linecard 0 port pipe 0. Displays the number of routes currently configured for the corresponding prefix or mask on the linecard 0 port pipe 0. Displays the CAM size allocated by FTOS for the corresponding mask. The CAM size is adjusted by FTOS if the number of routes for the mask exceeds the initial allocation. show ip cam stack-unit s Display content-addressable memory (CAM) entries for an S-Series switch. Syntax show ip cam stack-unit id port-set pipe-number [ip-address mask [longer-prefixes] | summary] Parameters id pipe-number ip-address mask [longer-prefix] summary Enter the stack-unit ID. Unit ID range: S55: 0-11 all other S-Series: 0-7 Enter the number of the Port-Pipe number. S50n, S50V range: 0 to 1; S25N, S25P, S25V range: 0 to 0 (OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword longer-prefixes to view routes with a common prefix. (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number routes which can be entered in to CAM. Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Version 7.7.1.0 Version 7.6.1.0 Introduced on the S55. Modified: Added support for up to seven stack members. Introduced on S-Series Example Figure 16-12. show ip cam stack-unit Command Example Force10#show ip cam stack-unit 0 port-set 0 10.10.10.10/32 longer-prefixes Destination EC CG V C VId Mac-Addr Port 10.10.10.10 0 011 0 00:00:00:00:00:00 3f01 CP Force10# 542 | IPv4 Routing