Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 770

www.dell.com | support.dell.com Table 27-1. show ip pim interface Command Example Fields Field DR Prio DR Description Displays the Designated Router priority value configured on the interface (ip pim dr-priority command). Displays the IP address of the Designated Router for that interface. show ip pim neighbor c e s View PIM neighbors. Syntax show ip pim neighbor Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Version 8.1.1.0 Version 7.8.1.0 Introduced on S55 Introduced on E-Series ExaScale Introduced on S-Series Example Figure 27-4. show ip pim neighbor Command Example Force10#show ip pim neighbor Neighbor Interface Address 127.87.3.4 Gi 7/16 Force10# Uptime/Expires Ver DR Prio/Mode 09:44:58/00:01:24 v2 1 / S Table 27-2. show ip pim neighbor Command Example Fields Field Neighbor address Interface Uptime/expires Ver DR prio/Mode Description Displays the IP address of the PIM neighbor. List the interface type, with either slot/port information or ID (VLAN or Port Channel), on which the PIM neighbor was found. Displays the amount of time the neighbor has been up followed by the amount of time until the neighbor is removed from the multicast routing table (that is, until the neighbor hold time expires). Displays the PIM version number. • v2 = PIM version 2 Displays the Designated Router priority and the mode. • 1 = default Designated Router priority (use ip pim dr-priority) • DR = Designated Router • S = source 770 | PIM-Sparse Mode (PIM-SM)