Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 337

Parameters ipv4 unicast peer-group-name detail summary (OPTIONAL) Enter the ipv4 unicast keywords to view information only related to ipv4 unicast routes. (OPTIONAL) Enter the name of a peer group to view information about that peer group only. (OPTIONAL) Enter the keyword detail to view detailed status information of the peers in that peer group. (OPTIONAL) Enter the keyword summary to view status information of the peers in that peer group. The output is the same as that found in show ip bgp summary command Command Modes EXEC EXEC Privilege Example Figure 8-24. Command Example: show ip bgp peer-group (Partial) Force10#show ip bgp peer-group Peer-group RT-PEERS Description: ***peering-with-RT*** BGP version 4 Minimum time between advertisement runs is 30 seconds For address family: IPv4 Unicast BGP neighbor is RT-PEERS Number of peers in this group 20 Peer-group members (* - outbound optimized): 12.1.1.2* 12.1.1.3* 12.1.1.4* 12.1.1.5* 12.1.1.6* 12.2.1.2* 12.2.1.3* 12.2.1.4* 12.2.1.5* 12.2.1.6* 12.3.1.2* 12.3.1.3* 12.3.1.4* 12.3.1.5* 12.3.1.6* 12.4.1.2* 12.4.1.3* 12.4.1.4* 12.4.1.5* 12.4.1.6* Table 8-14. Command Example fields: show ip bgp peer-group Line beginning with Peer-group Administratively shut BGP version Minimum time For address family BGP neighbor Description Displays the peer group's name. Displays the peer group's status if the peer group is not enabled. If the peer group is enabled, this line is not displayed. Displays the BGP version supported. Displays the time interval between BGP advertisements. Displays IPv4 Unicast as the address family. Displays the name of the BGP neighbor. Border Gateway Protocol IPv4(BGPv4) | 337